Difference between revisions of "Connector:Printer port"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→CPC Plus and KC Compact Pinout) |
|||
| Line 64: | Line 64: | ||
* Note: Despite of using a '''34pin''' edge connector, Amstrad used a '''36pin''' Centronics-style pin numbering. Pin 18 and Pin 36 do not exist on the 34pin edge connector. | * Note: Despite of using a '''34pin''' edge connector, Amstrad used a '''36pin''' Centronics-style pin numbering. Pin 18 and Pin 36 do not exist on the 34pin edge connector. | ||
| − | As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see [[8bit Printer Ports]]. | + | * As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see [[8bit Printer Ports]]. |
== CPC Plus and KC Compact Pinout == | == CPC Plus and KC Compact Pinout == | ||
| Line 88: | Line 88: | ||
| 8 || Data 6 ||Data 6 ||Data 6 | | 8 || Data 6 ||Data 6 ||Data 6 | ||
|- | |- | ||
| − | | 9 || Data 7 | + | | 9 || Data 7 (CRTC) ||Data 7 (PIO) ||Data 7 |
|- | |- | ||
| 10 || NC ||NC ||/Ack | | 10 || NC ||NC ||/Ack | ||
| Line 109: | Line 109: | ||
|- | |- | ||
|} | |} | ||
| − | CPC+ and [[KC Compact]] printer ports differ only on Pin 16,17. | + | CPC+ and [[KC Compact]] printer ports differ only on Pin 16,17. Also, Pin 9 is controlled differently on software side, see [[8bit Printer Ports]]. |
[[Category:Hardware]][[Category:CPC Internal Components]] | [[Category:Hardware]][[Category:CPC Internal Components]] | ||
Revision as of 23:25, 28 January 2010
Classic CPC Pinout
| Pin No. | CPC | PC / Centronics |
| 1 | /Strobe | /Strobe |
| 2 | Data 0 | Data 0 |
| 3 | Data 1 | Data 1 |
| 4 | Data 2 | Data 2 |
| 5 | Data 3 | Data 3 |
| 6 | Data 4 | Data 4 |
| 7 | Data 5 | Data 5 |
| 8 | Data 6 | Data 6 |
| 9 | GND | Data 7 |
| 10 | NC | /Ack |
| 11 | Busy | Busy |
| 12 | NC | PaperEnd |
| 13 | NC | SLCT |
| 14 | GND | /AutoLF |
| 15 | NC | |
| 16 | GND | |
| 17 | NC | |
| (18) | NC | |
| 19..26 | GND | GND |
| 27 | NC | GND |
| 28 | GND | GND |
| 29..30 | NC | GND |
| 31 | NC | /Init |
| 32 | NC | /Error |
| 33 | GND | |
| 34 | NC | |
| 35 | NC | |
| (36) | NC | /Select |
- Note: Despite of using a 34pin edge connector, Amstrad used a 36pin Centronics-style pin numbering. Pin 18 and Pin 36 do not exist on the 34pin edge connector.
- As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see 8bit Printer Ports.
CPC Plus and KC Compact Pinout
| Pin No. | CPC+ | KC Compact | PC |
| 1 | /Strobe | /Strobe | /Strobe |
| 2 | Data 0 | Data 0 | Data 0 |
| 3 | Data 1 | Data 1 | Data 1 |
| 4 | Data 2 | Data 2 | Data 2 |
| 5 | Data 3 | Data 3 | Data 3 |
| 6 | Data 4 | Data 4 | Data 4 |
| 7 | Data 5 | Data 5 | Data 5 |
| 8 | Data 6 | Data 6 | Data 6 |
| 9 | Data 7 (CRTC) | Data 7 (PIO) | Data 7 |
| 10 | NC | NC | /Ack |
| 11 | Busy | Busy | Busy |
| 12 | NC | NC | PaperEnd |
| 13 | NC | NC | SLCT |
| 14 | NC | NC | /AutoLF |
| 15 | NC | NC | /Error |
| 16 | +5V | NC | /Init |
| 17 | GND | NC | /Select |
| 18-25 | GND | GND | GND |
CPC+ and KC Compact printer ports differ only on Pin 16,17. Also, Pin 9 is controlled differently on software side, see 8bit Printer Ports.
